Sager » NP Series » NP6120

Sager » NP Series » NP6120 LCD Screen Replacement Guide

How to Remove Replace Install your Sager NP Series NP6120 Laptop LCD Screen

1. Remove the rubber covers from you Sager NP6120 LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Sager NP6120 Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Sager NP6120 LCD hinges with care as they are delicate.

6. Place the Sager NP6120 LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Sager NP6120 Inverter from the LCD.

8. You are now ready to replace and install your new Sager NP6120 LCD Screen.

9. Recconnect back your Sager NP6120 Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.